Dishwasher - How to replace the inner door gasket

Çözüm

Refer always to your product’s user manual safety information before any repair or maintenance operation. https://www.electrolux.com/support/user-manuals/

WARNING! RISK OF ELECTRIC SHOCK

Before any repair or maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

WARNING! RISK OF INJURY

Always take care when moving appliances. For heavy appliances it's safest for two persons to move it. Always use safety gloves and safety footwear. Wear safety gloves at all times to protect from cuts from sharp edges.

WARNING! RISK OF EYE INJURY

Wear safety glasses if you perform maintenance or repair work involving springs.

WARNING! CHOKING HAZARD

Small parts not for children under 3 years. Keep all small parts and packaging out of reach of children.

Only adults should use or install the product.

Before any repair or maintenance operation, turn off water supply to the appliance.

Make sure to use the product only for its designated purpose and verify that it is a compatible part for the intended product.

Do not use or install the product if damaged.

Please note that self-repair or nonprofessional repair can have safety consequences if not done properly and might void the warranty. Possessing the necessary know-how is essential.

How to replace the inner door gasket

1. If present, unhook and remove the plinth by pushing in the lower part (right & left)

2. Remove the outer door unscrewing the 6 screws (3 left & 3 right)

3. Unplug all the connections and harness from the detergent dispenser.

4. Remove the 6 screws (3 left & 3 right) and unplug all the connections and harness from sockets before removing the top part of the door where the control panel is.

5. Unhook the ground wire. Unhook the hinge rod.

6. Remove the 2 screws on the inner door (right & left) and remove the inner door.

7. Replace the inner door gasket.

8. Assemble all components in reverse order of the disassembly steps.